Engineer Characteristics Manual Usmc

Apprenticeship The is a formal military training program that provides active duty and Full Time Support (FTS) Navy, Marine Corps, and Coast Guard Service members the opportunity to improve their job skills and to complete their civilian apprenticeship requirements while they are on active duty. Department of Labor (DOL) provides the nationally recognized 'Certificate of Completion' upon program completion. USMAP enhances your job skills and shows your motivation for more challenging military assignments. Having a DOL Certificate of Completion is an advantage in getting better civilian jobs since employers know the value of apprenticeships. The following USMAP apprenticeship trades are related to MOS 1341 Engineer Equipment Mechanic:. Credential Table Legend In Demand The U.S.

Department of Labor sponsored analysis indicates the certification is frequently mentioned in online job postings. Related As The credentials shown in this table are related to this military occupation in one of three ways: Most, Some, or Other. Most: Credential is directly related to most of the major duties associated with the military occupation (at least 80%).

This is a list of vehicles and aircraft used by the United States Marine Corps, for combat. 1.2 Tracked Vehicles. 1.2.1 M1 Abrams; 1.2.2 M88 Recovery Vehicle; 1.2.3 Amphibious Assault Vehicle-7. 1.3 Support/Engineer; 1.4 Aircraft. 1.4.1 F/A-18 Hornet.

Note that the credential may require additional education, training or experience before you are eligible for them. To ensure a complete understanding of the credential requirements, click on the credential name in the table and review the page that follows. Some: Credential is related to some tasks associated with the duties of the military occupation (related 80% to at least one or more critical tasks but less than 80% of all of the entire military occupation). Note that the credential may require additional education, training or experience before you are eligible for them. To ensure a complete understanding of credential requirements, click on the credential name in the table and review the page that follows. Other: Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience. COOL$ Contact or call 850-452-6337/6583 for a Marine Corps COOL Program Analyst.

GI Bill ® Reimbursement for exam fees has been approved for payment through the GI Bill for the credentials with the GI Bill icon in this column. Accreditation ANSI This icon indicates that the credential has been accredited by the American National Standards Institute (ANSI). Accreditation is the process by which a credentialing or educational program is evaluated against defined standards, and if it meets these standards, is awarded recognition by a third party. ANSI accreditation tells you that the credential meets documented standards of quality.

NCCA This icon indicates that the credential has been accredited by the National Commission for Certifying Agencies (NCCA). Accreditation is the process by which a credentialing or educational program is evaluated against defined standards, and if it meets these standards, is awarded recognition by a third party. NCCA accreditation tells you that the credential meets documented standards of quality. ICAC This icon indicates that the credential has been accredited by the International Certification Accreditation Council (ICAC). ICAC accreditation tells you that the credential meets documented standards of quality, which you can review on their web site.

IAS This column indicates that the credential has been accredited by the International Accreditation Service (IAS). IAS accreditation tells you that the credential meets documented standards of quality, which you can review on their web site. Civilian Occupations Table Legend Duties Matched The civilian and military jobs share either most job duties or some job duties.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater) Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%) Bright Outlook The Bright Outlook icon indicates that new job opportunities are very likely in the future for this job. Green Occupation The Green Job icon indicates that this work is part of the green economy. The 'green economy' may change the work tasks and skills needed for jobs. Registered Apprenticeship The Registered Apprenticeship icon indicates that this job has an apprenticeship program registered with the U.S. Department of Labor. Local Salary Information Click the links in this column to go to the My Next Move for Veterans web site to view salary and employment information for the job.

Click link to go to Certified Welder (CW) COOL Snapshot page. Renewal Period: 6 months The American Welding Society (AWS), Certified Welder (CW) is a performance-based certification with no prerequisite courses or certifications required. The CW program tests welders on procedures used in the structural steel, petroleum pipelines, sheet metal and chemical refinery welding industries. There is a provision to test to a company-supplied or non-code welding specification. Tests for CW are performed at AWS Accredited Testing Facilities located throughout the world and are performance based. Final certification will provide candidates with a 'transferrable' credential. Click link to go to Certified Safety Specialist (WSO-CSS) COOL Snapshot page.

Renewal Period: 3 yearsCertified Safety Specialist (WSO-CSS) is an entry-level certification for safety practitioners who specialize in a specific area in the safety profession. Certificaiton is focused on the areas of fire safety, transportation safety, nuclear safety, hazardous materials, product safety, health care safety, electrical safety, oil well drilling and well servicing, mining & tunneling safety,and ladder safety. Candidate must be able to perform both the technical and management work of safety in their respective field in order to secure the most effective results through and with other people. Candidate must also be able to perform all of the technical and management work required of the safety position. Candidate must pass a written exam.

Click link to go to Undercar Specialist - Exhaust Systems (X1) COOL Snapshot page. Renewal Period: 5 yearsThe Undercar Specialist certification is designed to identify and recognize those technicians who can demonstrate knowledge of the skills necessary to diagnose and repair automobile brakes, suspension and steering, and exhaust systems. The ASE Undercar Specialist designation recognizes technicians who have demonstrated knowledge of the skills in Suspension and Steering (A4) and Brakes (A5) from the Automobile/Light Truck Test Series, and Exhaust Systems (X1) from the Specialty Test Series. Although it is not a stand-alone certification, Exhaust Systems (X1) has been combined as a technical complement to test technicians' knowledge of exhaust system inspection and repair, fabrication, installation, emissions systems diagnosis and repair, and exhaust system repair regulations. This designation is intended for those professionals who service and repair these undercar systems. To earn the Undercar Specialist designation, technicians must be currently certified in the Automobile Technician Test series areas of Suspension and Steering (A4) and Brakes (A5), and pass the Exhaust Systems (X1) test. Candidates must also have at least two years of hands-on working experience in automotive repair.

Appropriate vocational training may be substituted for up to one year of work experience. Click link to go to Certified Associate in Project Management (CAPM) COOL Snapshot page. Renewal Period: 5 yearsThe Project Management Institute (PMI), Certified Associate in Project Management (CAPM) is an entry-level certification for project practitioners. Designed for those with less project experience, the CAPM demonstrates an understanding of the fundamental knowledge, terminology and processes of effective project management.

The written exam covers project management areas such as initiation, planning, executing, monitoring and controlling, closing, and professional and social responsibility. Candidates must have a high school diploma or equivalent and at least 1500 hours professional experience on a project team or 23 hours of project management education. Click link to go to Certified Maintenance and Reliability Professionals (CMRP) COOL Snapshot page.

Usmc engineer characteristics manual pdf

Renewal Period: 3 yearsCertified Maintenance and Reliability Professionals (CMRP) is an entry-level certification. The Certified Maintenance & Reliability Professional (CMRP) program is designed for certifying the knowledge, skills and experience of M&R professionals. It's more than just committing textbooks to memory; it's a thorough examination of individual expertise measured against a universal standard. It was developed to assess professionals' aptitude within the five (5) pillars of the Maintenance and Reliability Body of Knowledge: Business Management, Equipment Reliability, Manufacturing Process Reliability, Organization and Leadership, and Work Management. There are no educational or experiential requirements to sit for the exam.

Click link to go to Certified Maintenance and Reliability Technician (CMRT) COOL Snapshot page. Renewal Period: 3 yearsThe Certified Maintenance and Reliability Technician (CMRT) is an entry-level certification. CMRT will provide a non-biased, third-party, objective assessment and confirmation of the skills of your industrial maintenance mechanics.

CMRT's are responsible for preventive, predictive, and corrective maintenance. They perform troubleshooting and analysis, and apply sound maintenance practices in all aspects of their work. CMRTs are multi-skilled individuals whose expertise is primarily mechanical in nature as opposed to instrumentation or electrical.

The CMRT exam tests competency and knowledge of specific tasks within four (4) domains: Maintenance Practices, Preventative and Predictive Maintenance, Troubleshooting and Analysis, and Corrective Maintenance. There are no specific education or experience requirements to sit for the exam. Click link to go to Medium/Heavy Truck - Gasoline Engines (T1) COOL Snapshot page. Renewal Period: 5 yearsThe Medium/Heavy Truck certification is designed to identify and recognize those medium and heavy truck technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair different systems of Class 4 through Class 8 trucks and tractors.

The ASE Medium/Heavy Truck Test Series includes eight certification exams: Gasoline Engines, Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems, Heating, Ventilation, and Air Conditioning (HVAC), and Preventive Maintenance Inspection (PMI). To become ASE certified, technicians must pass one or more of the Medium/Heavy Truck exams and present proof of at least two years of relevant work experience. Those who pass the Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems and HVAC tests, become ASE-certified Master Medium/Heavy Truck Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Medium/Heavy Truck - Diesel Engines (T2) COOL Snapshot page. Renewal Period: 5 yearsThe Medium/Heavy Truck certification is designed to identify and recognize those medium and heavy truck technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair different systems of Class 4 through Class 8 trucks and tractors. The ASE Medium/Heavy Truck Test Series includes eight certification exams: Gasoline Engines, Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems, Heating, Ventilation, and Air Conditioning (HVAC), and Preventive Maintenance Inspection (PMI).

To become ASE certified, technicians must pass one or more of the Medium/Heavy Truck exams and present proof of at least two years of relevant work experience. Those who pass the Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems and HVAC tests, become ASE-certified Master Medium/Heavy Truck Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Medium/Heavy Truck - Drive Train (T3) COOL Snapshot page.

Renewal Period: 5 yearsThe Medium/Heavy Truck certification is designed to identify and recognize those medium and heavy truck technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair different systems of Class 4 through Class 8 trucks and tractors. The ASE Medium/Heavy Truck Test Series includes eight certification exams: Gasoline Engines, Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems, Heating, Ventilation, and Air Conditioning (HVAC), and Preventive Maintenance Inspection (PMI). To become ASE certified, technicians must pass one or more of the Medium/Heavy Truck exams and present proof of at least two years of relevant work experience.

Usmc

Those who pass the Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems and HVAC tests, become ASE-certified Master Medium/Heavy Truck Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Medium/Heavy Truck - Suspension and Steering (T5) COOL Snapshot page. Renewal Period: 5 yearsThe Medium/Heavy Truck certification is designed to identify and recognize those medium and heavy truck technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair different systems of Class 4 through Class 8 trucks and tractors.

The ASE Medium/Heavy Truck Test Series includes eight certification exams: Gasoline Engines, Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems, Heating, Ventilation, and Air Conditioning (HVAC), and Preventive Maintenance Inspection (PMI). To become ASE certified, technicians must pass one or more of the Medium/Heavy Truck exams and present proof of at least two years of relevant work experience. Those who pass the Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems and HVAC tests, become ASE-certified Master Medium/Heavy Truck Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Medium/Heavy Truck - Electrical/Electronic Systems (T6) COOL Snapshot page. Renewal Period: 5 yearsThe Medium/Heavy Truck certification is designed to identify and recognize those medium and heavy truck technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair different systems of Class 4 through Class 8 trucks and tractors. The ASE Medium/Heavy Truck Test Series includes eight certification exams: Gasoline Engines, Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems, Heating, Ventilation, and Air Conditioning (HVAC), and Preventive Maintenance Inspection (PMI).

To become ASE certified, technicians must pass one or more of the Medium/Heavy Truck exams and present proof of at least two years of relevant work experience. Those who pass the Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems and HVAC tests, become ASE-certified Master Medium/Heavy Truck Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8) COOL Snapshot page. Renewal Period: 5 yearsThe Medium/Heavy Truck certification is designed to identify and recognize those medium and heavy truck technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair different systems of Class 4 through Class 8 trucks and tractors. The ASE Medium/Heavy Truck Test Series includes eight certification exams: Gasoline Engines, Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems, Heating, Ventilation, and Air Conditioning (HVAC), and Preventive Maintenance Inspection (PMI). To become ASE certified, technicians must pass one or more of the Medium/Heavy Truck exams and present proof of at least two years of relevant work experience.

Usmc Engineer Characteristics Manual Pdf

Those who pass the Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems and HVAC tests, become ASE-certified Master Medium/Heavy Truck Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Truck Equipment - Installation and Repair (E1) COOL Snapshot page. Renewal Period: 5 yearsThe Truck Equipment Technician Certification is designed to identify and recognize those truck equipment technicians who can demonstrate knowledge of the skills necessary to install, diagnose, service and repair truck equipment and related support systems on all classes of trucks and tractors.

The ASE Truck Equipment Test Series includes three certification exams: Truck Equipment Installation and Repair, Electrical/Electronic Systems Installation and Repair, and Auxiliary Power Systems Installation and Repair. To become ASE certified, technicians must pass one or more of the Truck Equipment exams and present proof of at least two years of relevant, verifiable work experience.

Engineer Characteristics Manual Usmc

Those who pass all three tests become ASE-certified Master Truck Equipment Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Truck Equipment - Electrical/Electronic Systems Installation and Repair (E2) COOL Snapshot page. Renewal Period: 5 yearsThe Truck Equipment Technician Certification is designed to identify and recognize those truck equipment technicians who can demonstrate knowledge of the skills necessary to install, diagnose, service and repair truck equipment and related support systems on all classes of trucks and tractors. The ASE Truck Equipment Test Series includes three certification exams: Truck Equipment Installation and Repair, Electrical/Electronic Systems Installation and Repair, and Auxiliary Power Systems Installation and Repair. To become ASE certified, technicians must pass one or more of the Truck Equipment exams and present proof of at least two years of relevant, verifiable work experience. Those who pass all three tests become ASE-certified Master Truck Equipment Technicians.

Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Truck Equipment - Auxiliary Power Systems Installation and Repair (E3) COOL Snapshot page. Renewal Period: 5 yearsThe Truck Equipment Technician Certification is designed to identify and recognize those truck equipment technicians who can demonstrate knowledge of the skills necessary to install, diagnose, service and repair truck equipment and related support systems on all classes of trucks and tractors. The ASE Truck Equipment Test Series includes three certification exams: Truck Equipment Installation and Repair, Electrical/Electronic Systems Installation and Repair, and Auxiliary Power Systems Installation and Repair. To become ASE certified, technicians must pass one or more of the Truck Equipment exams and present proof of at least two years of relevant, verifiable work experience.

Those who pass all three tests become ASE-certified Master Truck Equipment Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Medium/Heavy Truck - Heating, Ventilation and Air Conditioning (HVAC) (T7) COOL Snapshot page.

Renewal Period: 5 yearsThe Medium/Heavy Truck certification is designed to identify and recognize those medium and heavy truck technicians who can demonstrate knowledge of the skills necessary to diagnose, service, and repair different systems of Class 4 through Class 8 trucks and tractors. The ASE Medium/Heavy Truck Test Series includes eight certification exams: Gasoline Engines, Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems, Heating, Ventilation, and Air Conditioning (HVAC), and Preventive Maintenance Inspection (PMI).

Usmc Engineer Characteristics Manual 11240

To become ASE certified, technicians must pass one or more of the Medium/Heavy Truck exams and present proof of at least two years of relevant work experience. Those who pass the Diesel Engines, Drive Train, Brakes, Suspension and Steering, Electrical/ Electronic Systems and HVAC tests, become ASE-certified Master Medium/Heavy Truck Technicians. Technicians may substitute two years of relevant formal training for up to one year of the work experience requirement. Click link to go to Certified Vibration Analyst - Category I COOL Snapshot page. Renewal Period: 5 yearsThe Certification Vibration Analyst Certification program offers four categories of certifications. Category I is for the entry level vibration analyst's who are capable of performing a range of single channel machinery vibration condition monitoring and diagnostic activities including data acquisition on predetermined routes, machine steady state testing to predefined procedures, and comparison of readings against pre-established alert settings. Candidates for the Category I Certified Vibration Analyst certification must have at least 6 months experience and 30 hours of formal training.

Click link to go to Certified Vibration Analyst - Category II COOL Snapshot page. Renewal Period: 5 yearsThe Certification Vibration Analyst Certification program offers four categories of certifications. An individual certified as a Category II Vibration Analyst should have the knowledge and capabilities of a Category I Vibration Analyst.

A Category II Vibration Analyst should be able to define routine data collection activities including acquisition and analysis settings using basic signal analysis, collect extra test points when unusual conditions exist, perform single channel impact tests, interpret and evaluate test results in accordance with specifications and standards, diagnose common faults, and recommend basic corrective actions. The Category II Analyst shall be aware of and capable of recommending alternate condition monitoring technologies to verify issues raised as a result of routine condition monitoring. Applicants are required to have a minimum of 18 months' experience in the vibration field and a minimum of 68 hours of training.