Operator′s manual. Please read the operator's manual carefully and make sure you. ”Control, maintenance and service of the power cutter's.

1. Husqvarna K750 Service Manual
2. Service Manual Free Download

. Operator′s manual K750 Please read the operator’s manual carefully and make sure you E E E E n n n n g g g g l l l l i i i i s s s s h h h h. Key to symbols WARNING!

The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear:. Contents KEY TO SYMBOLS Key to symbols. CONTENTS Contents. WHAT IS WHAT?

What is what on the power cutter? SAFETY INSTRUCTIONS Steps before using a new power cutter.Personal protective equipment. Machine′s safety equipment. Checking, maintaining and servicing the machine′s safety equipment.

What is what on the power cutter? 1 Front handle 2 Water tap 3 Warning decal 4 Air filter cover 5 Cylinder cover 6 Choke 7 Throttle lockout 8 Throttle control 9 Start throttle lock 10 Stop switch 11 Starter handle 12 Starter 13 Muffler 4 –. Do not use the power cutter if the idle speed is not adjusted correctly!. Let your Husqvarna dealer regularly check the power cutter and make essential adjustments and repairs.

Under no circumstances may the design of the machine be modified without the permission of the manufacturer. SAFETY INSTRUCTIONS Machine′s safety equipment This section describes the machine′s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine. SAFETY INSTRUCTIONS Checking, maintaining and servicing the machine′s safety equipment WARNING! All servicing and repair work on the machine requires special training.

This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. Contact your local petrol station to find out where to dispose of excess fuel. Always use a Husqvarna fuel container with an anti-spill valve. Bear in mind the risk of fire, explosion and inhaling fumes. Stop the engine before fuelling.

SAFETY INSTRUCTIONS General working instructions WARNING! This section describes basic safety directions for using a power cutter. This information is never a substitute for professional skills and experience.

If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your dealer, service agent or an experienced power cutter user. SAFETY INSTRUCTIONS. Move the blade slowly forwards and backwards to achieve a small contact area between the blade and the material to be cut.

Husqvarna K750 Service Manual

This reduces the temperature of the blade and ensures effective cutting. Feed down the machine in line with the blade. Pressure from the side can damage the blade and is very dangerous.

SAFETY INSTRUCTIONS Pinching/rotation If the cut is pressed together this can lead to jamming. The machine can be pulled down suddenly with a very powerful jerk. How to avoid pinching Support the work piece in such a way that the cut remains open during the cutting operation and when the cut is finished. SAFETY INSTRUCTIONS Ensure the blade it not cracked or damaged in any other way. Test the abrasive disc by hanging it on your finger and tapping it lightly with a screwdriver or the like. If the disc does not produce a resonant, ringing sound it is damaged.

Diamond blades Diamond blades consist of a steel body provided with segments that contain industrial diamonds. Do not use warped, notched, indented or dirty flange washers. Do not use different dimensions of flange washers. Fitting the cutting blade Husqvarna’s blades are approved for hand-held power cutters. Blades are manufactured with three different diameters of centre holes: 20 mm (0.787'), 22.2 mm (7/8') and 25.4 mm (1').

This gives rise to a high engine temperature, which can result in serious engine damage. Two-stroke oil. For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two-stroke engines.

STARTING AND STOPPING Starting and stopping WARNING! Note the following before starting: Do not start the power cutter without the belt guard fitted. Otherwise the clutch could come loose and cause personal injuries. Always move the machine away from the refuelling area before starting.

Tensioning the drive belt. The drive belt is fully enclosed and well protected from dust and dirt. When the drive belt is to be tensioned, release the bolts holding the cutting arm. Screw the adjuster screw so that the square headed nut comes opposite the marking on the cover. In order to obtain a good filtering effect, the filter must be replaced regularly or cleaned and oiled. A special HUSQVARNA oil has been produced for this purpose.

Remove the foam plastic filter. Wash the filter well in tepid soapy water. After cleaning, rinse the filter well in clean water. Pull the cord out about 30 cm and lift it into the cut-out in the periphery of the starter pulley. When the cord is intact: Release the spring tension by letting the pulley rotate slowly backwards. Remove any remnants of the old starter cord and check that the return spring works.

Fitting the starter. To fit the starter, first pull out the starter cord and place the starter in position against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls. Tighten the screws. Spark plug The spark plug condition is influenced by:.

MAINTENANCE General maintenance instructions Below you will find some general maintenance instructions. If you have more questions, contact your service agent. Daily maintenance 1 Check that the components of the throttle control work smoothly (throttle control and throttle trigger lock). 2 Check the tension of the drive belt. 1/2 idling and 1/2 max speed. Cutting equipment Cutting blade Max. Peripheral speed, m/s 12” (300 mm) 14” (350 mm) TECHNICAL DATA K750 2700 9300 (+/- 150) 3,7/9000 Champion RCJ 6Y Zama 12” (300 mm) ) in conformity with EC directive 2000/14/EC.

Husqvarna Construction Products, SE-433 81 Partille, Sweden, tel: +00, declares under sole responsibility that the power cutter K750 from year 2006 serial numbers and onward (the year is clearly stated in plain text on the rating plate with subsequent serial number) conforms with the requirements of the COUNCIL’S DIRECTIVE:. 1150287-26 ´®z+R.

. Oper ator’s manual K760 Please r ead the operator’s manual carefully and make sure you understand the instructions before using the machine. U U U U S S S S E E E E n n n n g g g g l l l l i i i i s s s s h h h h.

KEY T O SYMBOLS Man ual version Decompression valve This man ual is the North American version used in the US and Canada. It contains information specific for North America which may not be applicable to countries outside North America. Refuelling, petrol/oil mix Symbols on the mac hine W ARNING! The machine can be a.

Service Manual Free Download

PRESENT ATION contains silica. Silica is a basic What is what on the po wer cutter - K760? 5 component of sand, quartz, brick clay, MA CHINE´S SAFETY EQUIPMENT granite and numerous other minerals Gener al.

Husqvarna is the global leader in outdoor power products X-T orq® for forestry, park maintenance and lawn and garden care, as well as cutting equipment and diamond tools for the The X-T orq®. PRESENT A TION What is what on the po wer cutter - K760? Front handle 15 Blade guard Water tap 16 Decompression valve Warning decal 17 Air purge Air filter cover 18 Fuel cap Cylinder cover 19 Water connection with filter. MA CHINE´S SAFETY EQ UIPMENT General. Check that the throttle trigger and throttle lockout move freely and that the return springs work properly.

Never use a machine that has faulty safety equipment! If your machine fails any checks contact your service agent to get it repaired. MACHINE´S SAFETY EQUIPMENT Blade guard Checking the vibration damping system WARNING! The engine should be WARNING! Always check that the guard switched off, and the stop switch in is correctly fitted before starting the STOP position. Check the vibration damping units regularly for cracks This guard is fitted above the cutting blade and is or deformation. Make sure that the right bushing is used for the cutting.

Husqvarna cutting blades are manufactured for high- blade to be fitted on the machine. See the instructions speed, portable power cutters. Under the heading Fitting the cutting blade.

CUTTING BLADES Abrasive blades Diamond blades General WARNING! Do not use abrasive blades with water. The strength is impaired when abrasive blades are exposed to WARNING!

Never use a diamond blade to water or moisture, which results in an cut plastic material. The heat produced increased risk of the blade breaking. CUTTING BLADES Diamond blades and cooling Transport and storage. During cutting the friction in the cut causes the.

Do not store or transport the power cutter with the diamond blade to be heated up. If the blade is allowed cutting blade fitted. STOP position. The direction of rotation for the machine is shown by arrows on the cutting arm.

Husqvarna’s blades are high speed blades approved for hand held power cutters. Checking the drive shaft and flange washers When the blade is replaced with a new one, check the flange washers and the drive shaft. Remove the belt from the belt pulley. If you are in a situation where you do not have access to Husqvarna OilGuard oil, but you have oil of a similar quality, you can deactivate the OilGuard system using the disconnection function. Environment fuel HUSQVARNA recommends the use of alkylate fuel or environmental fuel for four-stroke engines blended with two-stroke oil as set out below. Note that carburetor adjustment may be necessary when changing the type of fuel (see instructions under the heading Carburetor).

FUEL HANDLING Fueling Transport and storage. Store and transport the machine and fuel so that there WARNING! Always stop the engine and is no risk of any leakage or fumes coming into contact let it cool for a few minutes before with sparks or naked flames, for example, from refuelling. Tight-fitting, heavy-duty and comfortable clothing that coordination or judgement.

Permits full freedom of movement. Cutting generates sparks that can ignite clothing. Husqvarna recommends that you wear flame-retardant cotton or heavy denim. Do not wear clothing made of material such as nylon, polyester or rayon. If ignited such material can melt and cling to the skin. OPERATING. Never start to work with the machine before the WARNING!

Unauthorized modifications working area is clear and you have a firm foothold. And/or accessories may lead to serious Look out for any obstacles with unexpected injury or death to the user or others.

OPERATING. Stand at a comfortable distance from the work piece. Check that the blade is not in contact with anything when the machine is started.

Apply the cutting blade gently with high rotating speed (full throttle) Maintain full speed until cutting is complete. OPERATING Kickback Climbing kickback If the kickback zone is used for cutting the reactive force WARNING! Kickbacks are sudden and drives the blade to climb up in the cut. Do not use the can be very violent.

The power cutter can kickback zone. OPERATING If the pipe is allowed to sag and close the cut, the blade will be pinched in the kick back zone and a severe kick back might develop.

If the pipe is properly supported the end of the pipe will move downward, the cut will open and no pinching will occur. STARTING AND STOPPING Before starting WARNING! Note the following before starting: Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Wear personal protective equipment. See under heading ”Personal protective equipment”.

Press the air purge diaphragm repeatedly until fuel Do not start the machine without the belt begins to fill the diaphragm (about 6 times). STARTING AND STOPPING With a warm engine: NOTICE! Pull with your right hand out the starter cord slowly until you feel a resistance (as the starter pawls engage) and then pull firmly and rapidly. Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs. Maintenance schedule In the maintenance schedule you can see which parts of your machine that require maintenance, and with which intervals it should take place. This is before taking other steps.

Quite normal. Please contact an accredited Husqvarna workshop if you have any questions. Ensure that the spark plug cap and ignition lead are undamaged to avoid the risk of electric shock. MAINTENANCE Replacing the drive belt Carburetor The carburettor is equipped with fixed needles to ensure WARNING! Never start the engine when the machine always receives the correct mixture of fuel the belt pulley and clutch are removed and air.

When the engine lacks power or accelerates for maintenance. MAINTENANCE. Pull the cord out about 30 cm and lift it into the cut-out Changing a broken recoil spring in the periphery of the starter pulley. When the cord is. Undo the bolt in the centre of the pulley and remove intact: Release the spring tension by letting the pulley the pulley. MAINTENANCE Fuel system General.

Check that the fuel cap and its seal are not damaged. Check the fuel hose. Replace when damaged. Fuel filter. The fuel filter sits inside the fuel tank. The fuel tank must be protected from contamination when filling. TECHNICAL DATA Technical data Technical data K760 Motor Cylinder displacement, cu.in/cm 4.5/74 Cylinder bore, inch/mm 2/51 Stroke, inch/mm 1,4/36 Idle speed, rpm 2700 Wide open throttle - no load, rpm 9300 (+/- 150) Power, kW/ rpm 3,7/9000 Ignition system Manufacturer of ignition system.

Products must warrant the emission control system on charge to the owner at an approved Husqvarna your small nonroad engine for the period of time listed Construction Products servicing dealer. If you have any. FEDERAL EMISSION CONTROL WARRANTY STATEMENT MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS Any Husqvarna Construction Products approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty. Original instructions 1155019-27 ´®z+W! ¶75¨ ´®z+W! ¶75¨ 2013-03-05.