KM 85, KM 85 R english / USA. All the pictograms attached to the machine are shown and explained in this manual. The operating and handling. An instructional video on how to replace your trimmer line on your Stihl trimmer. STIHL FS 80, 85. Manual de instrucciones. Lawn and Garden readers have rated STIHL FS 80 85 Trimmer Owners Manual 5.0 out of 5.0 based on 1 product reviews.

1. Stihl Fs 85 R

. STIHL FS 87 Instruction Manual. Spark Arresting Screen in Muffler Spark Plug Lubricating the Gearbox Replacing the Starter Rope and Rewind Spring Storing the Machine Sharpening Metal Cutting Blades Maintenance and Care Minimize Wear and Avoid Damage Main Parts Specifications FS 87, FS 87 R. When the power tool is not in use, shut it off so that it does not endanger others. Intake air: Winter Secure it against unauthorized use. Operation The user is responsible for avoiding injury to third parties or damage to their Handle heating property. FS 87, FS 87 R.

Only use cutting attachments and STIHL offers a comprehensive range of accessories that are explicity approved personal protective clothing and for this power tool model by STIHL or equipment. Are technically identical.

If you have any questions in this respect, consult a. Never attempt to modify the controls – flammable fuel. Keep or safety devices in any way.

Clear of naked flames. Do not spill any fuel – do not smoke.

Always shut off the engine before refueling. FS 87, FS 87 R. The correct engine idle speed is Right handle on control handle, left hand the cutting attachment. Important to ensure that the cutting on left handle.

Attachment stops rotating when you let go of the throttle trigger. FS 87, FS 87 R. In case of doubt, have the unit lytic converter. Checked by your servicing dealer. FS 87, FS 87 R. Clean grass and plant residue off the When using metal cutting attachments STIHL must not be heavier, thicker, cutting attachment mounting at regular have a different shape or a diameter intervals – remove any build up of. English Maintenance and Repairs Use only a spark plug of the type approved by STIHL and make sure it is in good condition – see 'Specifications'.

Service the machine regularly. Do not Inspect the ignition lead (insulation in attempt any maintenance or repair work good condition, secure connection). Use for grass and weeds only – sweep or similar obstacles). The brushcutter in an arc like a scythe. Check the wear limit marks!

Improper use may damage the grass cutting blade – risk of injury from thrown parts. FS 87, FS 87 R. Exercise extreme caution when using STIHL recommends that you use the Up to a stem diameter of 7 cm when this method of cutting. The higher the non-shaded area of the circular saw used on clearing saws.

English Approved Combinations of Cutting Attachment, Deflector, Handle and Harness Cutting Attachment Deflector Handle Shoulder strap FS 87, FS 87 R. 21 Barrier bar 22 Bike handle Mowing heads STIHL SuperCut 20 - 2 Harnesses STIHL AutoCut C 25 - -2 STIHL AutoCut 25-2 23 Shoulder strap may be used STIHL TrimCut 31-2 24 Shoulder strap must be used STIHL FixCut 25-2. Throttle Cable'.

Insert the screw (8) and tighten it down firmly. Fitting the throttle cable Do not kink the throttle cable or lay it in tight radii – make sure the throttle trigger moves freely. FS 87, FS 87 R. Fit the square nuts (1) and screw them down as far as stop. Go to 'Securing the loop handle'. Go to 'Securing the loop handle'.

FS 87, FS 87 R. Insert the M6x14 screw (2). Line up the carrying ring. Tighten down the screw firmly. Press down the throttle trigger lockout (1) and squeeze the throttle trigger (2) (full throttle) – this sets the throttle cable correctly. FS 87, FS 87 R. Place the deflector on the gearbox guide slot on the skirt and line it up flange.

With the first hole. Insert the screws (3) and tighten Insert the screw and tighten it down them down firmly. FS 87, FS 87 R. Pull the thrust washer (5) off the The nut (3), rider plate (4) and thrust shaft (2). Wsher (5) are in the parts kit supplied with the machine. The rider plate (4) is in the parts kit supplied with the machine. FS 87, FS 87 R.

STIHL AutoCut 25-2, STIHL AutoCut 25-2, attachment'. STIHL AutoCut C 25-2, STIHL AutoCut C 25-2, STIHL TrimCut 31-2, STIHL FixCut 25- STIHL TrimCut 31-2, STIHL FixCut 25- Blocking the output shaft 2, STIHL PolyCut 20-3 2, STIHL PolyCut 20-3 Unscrew the mowing head clockwise. (13) on to the output shaft counterclockwise Lay your brushcutter on its back with the and tighten it down firmly. Cutting attachment mounting face pointing up: The cutting edges of (2), (4) FS 87, FS 87 R. Use only high-quality two-stroke engine provides the proper mixing ratio.

Oil – ideally STIHL HP, HP Super or STIHL MotoMix is blended with STIHL HP Ultra two-stroke engine oil, as they HP Ultra two-stroke engine oil for are specially engineered for STIHL maximum engine life. Pressure can build up inside the canister – open carefully. Cliplock filler cap (bayonet-type) The fuel tank and the canister in which fuel mixture is stored should be cleaned thoroughly from time to time FS 87, FS 87 R. English Refueling Opening screw-type tank cap Take care not to spill fuel while fueling and do not overfill the tank.

STIHL recommends use of the STIHL filling system (special accessory). Closing the cliplock filler cap Threaded filler cap Opening the cliplock filler cap. (2) on the drive tube. Put on the shoulder strap (1).

Adjust the length of the strap so that the carabiner (2) is about a hand’s width below your right hip. Balance the brushcutter. FS 87, FS 87 R. When the correct floating position has have been met: been reached: Adjust the carrying ring.

Tighten down the screw on the Tighten the screw moderately. Carrying ring firmly. Allow the unit to hang freely. Check the position obtained. FS 87, FS 87 R. (h) to STOP-0. Press the fuel pump bulb (9) at least five times – even if the bulb is filled with fuel.

Stihl Fs 85 R

FS 87, FS 87 R. The cutting attachment must Move the slide control to STOP-0. Not rotate when the engine is idling. Remove the spark plug – see Your machine is now ready for 'Spark Plug'. Dry the spark plug.

FS 87, FS 87 R. Installing the filter you need it again. For longer out-of- service periods – see 'Storing the Machine'.

Install the filter element in the filter housing and fit the cover. Insert the screw and tighten it down firmly.

FS 87, FS 87 R. (not in all versions) and clean or idling, have your machine checked and These machines have been set at the replace as necessary.

Repaired by your servicing dealer. Factory to provide an optimum fuel-air mixture in all locations and operating conditions. FS 87, FS 87 R. Cutting attachment runs when engine is idling Turn the idle speed screw (LA) counterclockwise until the cutting attachment stops running and then turn the screw about another 1/2 to 3/4 turn in the same direction.

FS 87, FS 87 R. Wait for the muffler to cool down. Take out the screw (4). Only suppressed spark plugs of the Move the slide control to STOP - 0. Type approved by STIHL – see Lift the spark arresting screen (5) 'Specifications'.

And pull it out. Refit the filler plug (1) and tighten it down firmly. If the spark plug comes with a detachable adapter nut (1), screw the adapter onto the thread and tighten it down firmly to reduce the risk of arcing and fire. FS 87, FS 87 R. Coat the rope rotor bearing bore with non-resinous oil.

Slip the rotor over the starter post – turn it back and forth to engage the anchor loop of the rewind spring. FS 87, FS 87 R.

If the spring pops out of the spring overtensioned and could break. Housing and uncoils: Refit it Take one turn of the rope off the counterclockwise, starting outside rotor. And working inwards.

FS 87, FS 87 R. Resharpen Dispose of fuel properly in with a grinder or have the work done accordance with local by a dealer – STIHL recommends a environmental requirements. STIHL servicing dealer.

Run the engine until the carburetor Resharpen frequently, take away as is dry –. After resharpening about 5 times, check the cutting attachment for out-of-balance on a STIHL balancer (special accessory) or have it checked by a dealer and re- balanced as necessary – STIHL recommends a STIHL servicing dealer.

FS 87, FS 87 R. Combustion chamber tion, then every 150 hours of operation Check Spark arresting screen in muffler Clean or replace All accessible screws and nuts (not adjust - Retighten ing screws) Check Antivibration elements Have replaced by dealer FS 87, FS 87 R. (very dusty work area, etc.), shorten the specified intervals accordingly. Visual inspection Cutting Attachments Replace Check tightness Metal cutting attachments Sharpen Check Gearbox lubrication Replenish Safety labels Replace STIHL recommends a STIHL servicing dealer. Not in all versions, market-specific FS 87, FS 87 R. – owner, they should be performed by a servicing dealer. Clutch – STIHL recommends that you have Filters (air, fuel) – servicing and repair work carried out Rewind starter – exclusively by an authorized STIHL FS 87, FS 87 R.

10 Throttle cable retainer 11 Carrying ring 12 Fuel pump 13 Choke knob 14 Air filter cover 15 Fuel tank 16 Machine support 17 Handle support 18 Loop handle 19 Barrier bar 20 Drive tube Serial number FS 87, FS 87 R. Bosch USR 7 AC Deflector for mowing heads only Blade Electrode gap: 0.5 mm Deflector for all mowing Fuel System attachments Skirt Metal mowing attachment All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 0.53 l FS 87, FS 87 R.

STIHL TrimCut 31-2 handle: 3.5 m/s 2.5 m/s with the same duration of exposure. STIHL FixCut 25-2 FS 87 R with bar - STIHL PolyCut 20-3 rier bar: 2.8 m/s 4.2 m/s For further details on compliance with Vibration Directive 2002/44/EC see. – Directives 2006/42/EC, 2004/108/EC approved by STIHL for this power tool or and 2000/14/EC and has been are technically identical. Only use high- Other special accessories developed and manufactured in. All STIHL products comply with the highest quality standards.

Mercury 15 hp outboard 2 stroke. An independent organization has certified that all products manufactured by STIHL meet the strict requirements of the ISO 9001 standard for quality management systems in terms of product development, materials purchasing, production, assembly, documentation and customer service. English FS 87, FS 87 R. 0458-274-0121-C englisch www.stihl.com.1C. 0458-274-0121-C.